Fujitsu PRIMERGY TX100 S3 - Classification of Procedures; Customer Replaceable Units (CRU)

22 Upgrade and Maintenance Manual TX100 S3
Before you start
Replacing a defective component
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.
I The "ServerView Suite Local Service Concept (LSC)" manual is
available from the ServerView Suite DVD 2 supplied with your
PRIMERGY server or online at:
http://manuals.ts.fujitsu.com (EMEA market) or
http://jp.fujitsu.com/platform/server/primergy/manual/ (Japanese market).
2.1 Classification of procedures
The complexity of maintenance procedures varies significantly. Procedures
have been assigned to one of three unit categories, indicating the level of
difficulty and required qualification.
At the beginning of each procedure, the involved unit type is indicated by one of
the symbols introduced in this section.
I Please ask your local Fujitsu service center for more detailed
information.
2.1.1 Customer Replaceable Units (CRU)
Customer Replaceable Units are intended for customer self service.
I Components that the customer is entitled to replace may differ according
to the service form in his country.
Peripherals that are handled as Customer Replaceable Units
– Keyboard
– Mouse
Customer Replaceable Units (CRU)