398 iRMC S2/S3
IPMI OEM Commands supported by the iRMC S2/S3
C0 19 - Get Remote Storage Connection or Status
Depending on the parameters passed, this command returns information on
– whether any Remote Storage connections are available,
– the status and type of any Remote Storage connection(s).
If Request Data 1 is set to “1”, the command returns information as to whether
storage media are connected as Remote Storage.
Request Data - C0 NetFnlLUN: OEM
- 19 CMD : Command Group Firmware
101
200
300
Response Data - C4
- 19
1 Completion Code
2 01
3 00: No
01: Yes, connected
4 00
5 00
To Next Page
Loading...