iRMC S2/S3 399
IPMI OEM Commands supported by the iRMC S2/S3
If Request Data 1 is set to “2”, the command returns information on the status and
type of any Remote Storage connection(s).
Request Data - C0 NetFnlLUN: OEM
- 19 CMD : Command Group Firmware
102
200
3 00 = Connection 0
01 = Connection 2
Response Data - C4
- 19
1 Completion Code
2 02
3 00
4 00
5 00 = Invalid / unknown
01 = idle
02 = Connection Attempt pending
03 = Connected
04 = Connection Attempts retries exhausted / failed
05 = Connection lost
06 = Disconnect pending
6 00 = Invalid / unknown
01 = Storage Server / IPMI
02 = Applet
03 = None / Not connected
To Next Page
Loading...