UUS1 text messages
Youcansendtextmessagesfromonetelephonetoanotherwithouthavingtocallthatparticularsubscriber.
UUS1 text messages are limited to 31 characters.
UUS1text messagescanalso besent tointernaland externaltelephones. Youcan onlyusethis
feature with external telephones if »UUS1 (User to User Signaling)« has beenapplied for (and
approved) for your ISDN connection.
Note that all terminal devices that are used (telephones, pabx systems) must support the feature »UUS1
(User to User Signaling)«.
ThetelephonestoresallUUS1messagesyouhavereceivedorsentintwoseparatelists. Upto10receivedan
10 sent UUS1 messages can be stored.
Pleasenotthatfreestoragespace mustbeavailabletoreceiveUUS1text messages. Youcan notreceive any
further UUS1 text messages if you already have 10 UUUS1 messages stored.
UUS1 messages you have sent can be stored ina list. When this list is full the UUS1 text message that was
sent last is stored temporarily.
Creating and sending text messages Creating and sending text messages
Youcansendatextmessagetoanumberstoredinyourtelephone(telephonedirectory,VIPmemoryordi-
rectdialingmemory),orinputanewnumberforsending. Todothis,pressthecorrespondingsoftkeyinthe
menu »Send mail»Tel. drctry«, »direct«, »VIP«, »New« or »Redialing«.
Toselectanumberassignedtoafunctionkey(»direct«)orstored undertheredialbutton, youcanalso
press that corresponding key.
When sending text messages the first number (»MSN-1«) entered in the telephone or the
number specified by means of the userecall flash button are transmitted with the message.
Begin as follows:
a
>sss
Message
SMS or UUS
Send mail
Example: Creating a UUS1 text message
t
O
Enter the text.
In this example: »Meeting 9. 30 to
11. 00 George«.
Confirm your entry with OK.
Send mail
UUS>Meeting 9. 30 a. m.
to 11. 00 a. m. George_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
s Press the corresponding softkey to select a
number stored in your telephone, or press
»New« to enter a new phone number. FOR
EXAMPLE.: »New«.
Send mail/UUS
Repeat
Tel. drctry
New
VIP
direct
Telephone operation
41