Funkwerk elmeg CS400xt - Further Settings When Using a Headset; Connecting the Telephone to a PC; Connecting the PC Connection Cable (USB)

Assignment of the headset jack pins (CS410 / CS410-U)
8 - transmitter
7 - V+ (3.3V)
6 - Microphone - (Ground)
5 - Handset (3.3 V switchable via resistor)
4 - Handset (ground)
3 - Microphone +
2 - Ground
1 - receiver
Assignment of the headset jack pins (CS400 / CS400 /CS400xt)
4 - Microphone - (Ground)
3 - Handset
2 - Handset (ground)
1 - Microphone +
Further settings when using a headset
Youcan usethe handsetor theheadset formakingcalls. With headsetoperation, thefollowing settingsare
required or possible:
•
Whenconfiguringyourtelephone,programoneofthefunctionkeysforheadsetoperation(headset
button,seepage54).
•
You can use the headset connected to your system automat ically for certain actions on the phone
(seepage70).
•
Ifaspecialsupportfeatureisstoredinyourtelephonefortheheadsetyourareusing,setyourphone
forthatheadsetmodel(seepage59).
Forexample,theLEDinthemicrophoneextensionfor»FireflyF142N«fromPlantronicscanbeac
-
tivatedbythetelephone.
•
Ifyouwouldlike to use the auto-answer feature withyourheadset, setthe time after whicha call is
answered(seepage70).Whenconfiguringyourtelephone,youshouldprogramafunctionkeytobe
usedforactivatingordeactivating theauto-answer feature.
•
If you have configuredyour phone for automaticheadset use, you canpoll the answering machine
usingtheheadset.
Connecting the telephone to a PC
Connecting the PC connection cable (USB)
Usethe USBcord supplied withthesystem toconnect thetelephonetothePC, ortothe hub. If
youuseadifferentUSBcord,ensurethatthedistancebetweenthetelephoneandthePC,orbet
-
weenthetelephoneandthehub,doesnotexceedfivemeters,dependingonthetypeofcordyou
are using.
Description and installation
7
1
2
3
4
Figure 4
Figure 3