Funkwerk elmeg CS400xt User Manual

s Press the softkey »ok« to reset the telephone
to its initial state. If you do not wish to have
the data deleted press the softkey »no«.
Sure to delete all?
OK, incl. AM
No
ok
User data only
When you press the corresponding softkey
e.g.. »ok« the telephone is reset tothedefault
configuration.Alldataisdeleted, thetelepho
-
nestarts new. Thiscould take several seconds
to complete.
29.05.03 07:41 }
Info -i-
Tel. drctry
Quiet
VIP
Software
Downloading new firmware
»Funkwerk Enterprise Communications GmbH« provides a server PC which can be used for loading new
firmware into your CS410 and CS410-U system telephones. In this case, the firmware is downloaded
throughtheISDNconnection.Download can take 12 minutes approximately, depending on the size of the
firmware file. Please note that there is a charge for loading firmware via an external ISDN connection.
WiththeIP-S400 youcanusetheProfessionalConfigurator(WIN-Tools forthepabx)under»Systemtele-
phones«,»Indirectsoftwaredownload« totriggeramanualfirmwaredownload. IntheProfessionalConfi-
gurator you can entertheInternet address for the firmware download. For this, no keys need to bepressed
on the system telephone.
For more information about firmware download, refer to the »Firmware Download IP« des-
cription on your CD.
•
Do not press any keys (unless prompted to do so) or plug in or unplug any connectors while data
transferisinprogress. If theconnectinglineisinterruptedduring adownload,restartthe downlo-
adprogramandproceedasdescribedpreviously.
•
Once the new firmware has been loaded completely the telephone performs a RESET and is then
availableforuseagain.
•
In some circumstances all of the data in your phone may be deleted after a firmware download. If
this is the case, a notice is given prior to starting the download. Prior to downloading, save all of
yourtelephonedata (configuration,phonedirectory)toyourPC.
Downloading new firmware using the telephone’s USB port
You can loadthe newest firmware versions intoyour telephone via the phone’sPC interface and usingthe
WIN-Tools CD ROM supplied with the system.
•
ConnectthephonetothePC.
•
Loadthenewfirmwareintoyour PC(e.g.fromtheInternet).
•
Launchthedownload manageroftheWIN-Tools.
•
Inthefield»Typeofconnection«selectthe»USB«port.
•
Goto»File«,»Open«andselectthedirectorywherethenewfirmwareisstored.
Service
93

Funkwerk elmeg CS400xt Specifications

General

Brand	Funkwerk
Model	elmeg CS400xt
Category	Telephone
Language	English