Day/ Night modes
You can configure a key so that you can switch between the call switching modes of the PABX(Day/Night
modes)whenthatkeyispressed. Thepabxuses callmodesforsignalingteamordoorterminalcalls,forex
-
ample.
Announcement (see page 24)
Message enable on/off
You can also explicitly inhibit or enable receiving of messages using a corresponding function key.
Intercom (see page 25)
Intercom enable on/off
You can also explicitly inhibit or enable receiving of intercom calls using a corresponding function key.
Boss/Sec.-function
This function enables the interaction between the phones of the secretary andthe boss. Here, a specialex
-
tensionkeywiththenumberoftheboss phoneisassignedtothesecretaryphone,andonewiththenumber
of the secretary phone assigned to the boss phone.
Xfer secretary
In conjunction with a configured »Boss key« you can use this key to determine whether calls are to be put
through directly to the boss, or whether they are to be signaled in the secretary’s office.
Call filter
Thecallfilterallowsyoutoexplicitlyrejectorforwardcallstoyoursystemtelephone. Arejectedcallisgiven
abusysignalandisstoredinthecallerlistwithaspecialflag. YoucanconfigurethecallfilterusingPCCon-
figuration for the system telephone and activate or de-activate the filter using this function key.
Call rerouting
Youcanconfigure abuttonsuch thatcallrerouting is setup for aspecificextension number(MSN) of your
phone. Press this button to activate or deactive call forwarding (see page 66).
Direct dial-in
Directdial-infromthetelephonecanbeconfiguredviaprogrammedfunction keys.Thedirectcallnumber
mustbestoredinthetelephonebeforedirectcallingviaafunctionkeycanbeprogrammed. Deactivationof
direct calls is carried out as described in the section »Direct call« (see page 66).
Headset on/off
If you have a headset connected to your telephone and ready configured, you can operate it by means of a
function key. In the factory default setting, buttons 4 (headset) and 5 (auto-answer) are programmed for
this.
Press the headset key to initiate, accept or end a call.
Auto-Answer
Your telephone can accept calls automatically, without you having to lift the handset or press the
speakerecall flash button. The time interval, after which a call is automatically answered, is programmed
System telephony
54
To Next Page
Loading...
Need help?
General
