Messages can also bereceived even if the »Station guarding« function isactive whenthe »Enabling messa
-
ges« function key has been programmed and is activated.
Youcan initiateamessageusingtheprocedure describedbelow,orusingaprogrammedfunctionkey.You
can also initiate a message during an ongoing call (inquiry call) using the corresponding function key.
Youcanonlyutilizethisfunctionifthemessagingfeaturehasbeenenabledinthepabxforyour
MSN extension number.
Begin as follows:
a
Ms>s
Acoustic Message
t Enter the telephone number, for which the
messageis tobe given, or select an entry from
the telephone directory.
| Message to
MSN-1
Tel. drctry
g
L
As soon as a telephone accepts the message,
the connection is established.
Press the open listening/hands-free button to
end a message.
| Message 22
00.24 MSN-1
Display
memo
Intercom
Theintercom functionallowsyou to establishaninternal connectionto another systemtelephonewithout
the called system telephone having to accept the call actively (lift up handset, hands free calling/activate
open listening). This is a call in which both parties can speak to one another.
As soon as thesystem telephonehas accepted theintercom call, theconnection isestablished. If oneof the
parties picks up the handset during an intercom call, the call becomes a standard type of call.
Foranintercomcall,entertheinternalnumberofthepartyyouwishtocall. Youalsoonlyneed
to enter the internal number with direct exchange line access. e.g. »22« instead of »*22«.
Whenanintercomcallcomesinforyour systemtelephone,thenumberorthenameofthecallingpartyap
-
pearsinthedisplay.TheintercomcallcanbeterminatedatanytimebypressingtheESCkey. Intercomcalls
are accepted automatically by activating the »Hands- free« feature when:
•
thetelephoneisidle,
•
the intercom feature has been enabled for the pabx (control by means of the »Enabling intercom«
functionkey).
•
the»Silentsignalling«functionisnotactivated.
Intercomcallscanalsobereceivedevenifthe»Stationguarding«functionisactivewhenthe»Enableinter
-
com calls« function key has been programmed and is activated.
You can initiate intercom calls using the following procedure, or using a programmed function key.
You can only utilize this functioniftheintercomfeature forsystem telephones has been enab
-
led in the pabx for your MSN extension number.
Making Calls
25
To Next Page
Loading...
Need help?
General
