Funkwerk elmeg CS400xt User Manual

•
OnlyterminalswithSELVand/orwhichcomplywithETS300047maybeconnectedtotheunit.This
regulationisfulfilledwhenapprovedterminaldevicesareused asintended.
Plug-in power supply
•
Useonlyapproved powerplug-inunits(DSA-0101F-05 UPorL15D52ABDDLAWO).
•
Donotusepowerplug-inunitswithvisibledefectsordamage(fissures,cracks,etc.)
Elektrostatic charges (protection against electrostatic charges)
The telephone is supplied with enhanced ESD protection against the effects of electrostatic discharge that
exceedstheprotection level cited intheapproval specification. Elevated ESD levels should neverthelessbe
avoided to the greatest possible extent. In some cases, electrostatic discharge levels can far exceed the ap
-
provallimits orthe resistancelevels alreadyimplementedinyour telephones. Eliminatethecausesor con
-
ditions that promote these elevated ESD levels, such as insufficient humidity or carpeting. The telephone
manufacturer does not assume any liability for damage caused under such circumstances.
Unpacking and placing the telephone
Unpacking
•
Systemtelephone
•
Handsetwithhandset connectingcord
•
2feet
•
1ISDNconnectingcord,approx. 6m(notwithIP-S400)
•
Cat.5connectingcord,approx. 2m(only withIP-S400)
•
PC-Connectioncable/ USBcord,approx.3m(notwithCS400andIP-S400)
•
PC-audiocable,3.5mmstereo jack,approx.2,5 mlong(notwith CS400 andIP-S400)
•
Adaptercord forheadset witha4pinconnectingcord (8pin/4pin)
•
Cableholder(self-adhesiveafterremovingthefilm)(notwithCS400)
•
Operatinginstructionsand labelsforfunctionkeys
Supplementwithtelephonesafety instructions
•
WIN-ToolsCD-ROMwith:
ProfessionalConfigurator,telephonedirectory-,download- andsoundmanager,
TAPI-,USB-,CAPI-andNDISWAN driver,Adobe AcrobatReader,
Operatinginstructionsand AdobeAcrobatfilefortheprintingofindividuallabels
Placing the telephone
Beforeinstallingthe telephoneyou mustmounttherear feetfor thetelephoneatthepositions(6)shownin
figure 1.
Pleasenotethatthefeetofyourtelephonemayleavemarksonsensitivesurfaces,suchasfurniture. Thema
-
nufacturer of the telephone is not liable for any such damage. Therefore, use appropriate non-skidding
pads under the phone.
Cleaning the telephone
The ISDN system telephone has been manufactured for normal, everyday use. When required, clean the
ISDN system telephonewith a slightlymoistened cloth, or withan anti-staticcloth. Never usea solventto
cleanthephone!Neveruseadrycloth;electrostaticchargescoulddamagetheelectronicsinthesystem. Itis
essential that no liquids penetrate into the inside of the ISDN system telephone, as this could destroy the
phone.
Description and installation
4

Funkwerk elmeg CS400xt Specifications

General

Brand	Funkwerk
Model	elmeg CS400xt
Category	Telephone
Language	English