nue?«.Thefirmwaredownloadisstartedonlyafter youhaveconfirmedthispromptbypressing»ok«. If
the data for the telephone are not deleted during the download, the download is started without first
displaying the above prompt.
Telephone BIOS
ThistelephoneisequippedwithaBIOS(basicfunctions)inEnglish.TheBIOSfunctionsalsoremainavaila
-
bleevenifthefirmwareofthetelephonedoesnotoperateproperly,orifnewfirmwarewas notloadedcom
-
pletely (e. g. if the PC crashed while loading the firmware).
The following functions are available in the telephone’s BIOS
•
Allphonecalls aresignaled. Nonumber(MSN)hasbeenenteredinthetelephone.
•
Dialing of outgoing calls ispossible afterlifting the handset (no call preparation, no open listening
orhands-freecalling).
•
Loadingnewfirmwareviathephone’s PCport orviatheISDNconnection.
Downloading new firmware via the PC port
ToloadnewfirmwareintheBIOSofyourtelephoneviathePCport,proceedasdescribedonpage93ofthe
-
se operating instructions.
Downloading new firmware via the ISDN connection
s You are shown the BIOS menu for the tele-
phone.
Ifyou wishtoload newfirmware viatheISDN
connection, press the »Update« softkey.
Cx410-bios 1.13 by ps
Update
Info
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Now proceed as described on page 94 of these operating instructions.
Attention::Thesettings for the »Set«softkey are used for service and diagnosis. Anysettings
youmaymakeormodify inthismenuwillaffecttheoverallfunctionalityof yourtelephone. In
some cases the telephone may not be able to be used if these settings are changed.
Country
Country-specific settings
Certain specific parameters need to be set if the telephone is to be used in a country otherthan thecountry
configured as default.
This includes for example setting the language, the currency and certain default specific parameters for a
country’s ISDN network.
Checkasdescribedbelowwhetheryouneedtosetcountry-specificparametersforthecountryinwhichthe
telephone is to be used.
Service
95
To Next Page
Loading...
Need help?
General
