s macro:
Programming macro buttons (»macro«
softkey)
Please select a function key first. First enter a
name for that macro (max. 20 characters.
Then enter the separate macro commands.
A macro’s command string is limited to 26
characters. Eachcommand orbuttonsimula
-
tionconsistsoftwocharacters.Youcanthere
-
foreonlylinkamaximumof13commandsto
-
gether,or,forexample,join7commands/key
stroke simulations with a further 12 digits.
Commands and keys for macro programming
A macro consists of variouscommands, orecallflash button strokes, that arecompiled into one command
sequence and stored under a defined direct dialing key. When this function key is pressed, the individual
commands contained in the macro are executed one after the other.
The following commands are available for macro programming:
»B« Initiatingacall(sameasliftingthehandset)
»D« Endingacall(sameasreplacingthehandset)
»ELSE« Alternativecommand,ifarequiredcondition(e.g.»IFLA«or»IFLB«)isnotfulfilled.
»IFLA«
»IFLB«
ExecutethismacroonlywhentheLEDforthefirstlevelisoff(»IFLA«)orflashes(»IFLB«).
Ifthisconditionisnotfulfilledtheprocedureisdiscontinued,orresumedafterthecommand
»ELSE«(whereavailable).
»K« Keypadsequence;allofthefollowingcharacters/digitsaretransmittedasakeypadsequence.
»LA« DeactivateLED
»LB« TheLEDflashes
»LE« ActivateLED
»LZ« ActivateLEDfortwoseconds
»n« Dummynumber.
If a number is entered prior to execution of a macro (or for example, dialed from the tele
-
phone)thisnumberisusedinplaceofthedummynumberinthemacro.
»P« Pause(1second)inthecommandsequence(betweentwocharacters/commands)
»RE« Re-establishthephone’sidlestate.
Ifthereisanactiveconnectionatthisphone,executionofthismacroiscanceledatthispoint.
»SE« Activatingthespeaker(normalvolume)
»SA« Activatingthespeaker(lowvolume)
»T« DTMF-Sequenz:allofthefollowingcharacters/digitsaretransferredasDTMFdialing.
88
To Next Page
Loading...
Need help?
General
