t Enterthe»Log-in PIN«.When youpressthe0
key severaltimes in a row the possiblespecial
characters that can be used are displayed,
along with their current position on the key
panel. Up to 4 levels are displayed each time
youpressthe0key.Whenyouthenpressakey
0...9 the character displayed for that particu
-
larkeyisselected.Waituntilthecursormoves
forward one field before attempting to enter
the next character. Only the character that is
currently being entered is visible; characters
that have already been entered are hidden by
the asterisk symbol.
Example: Press the key 0 one time and then
key 6; the @ symbol is selected.
Please enter
login PIN
MSN-1> *@_
Please enter
login PIN
1=! 2=% 3=?
4= 5=: 6=@
7=, 8=. 9=0
O
E
Confirm your entry by pressing OK.
Press the
E
button.
• SynchronizingoftelephoneandPABXsystem.
Please note that logging in and synchronization may take several moments!
IfthereisnoconnectiontothePABXsystem(noLANlink,orthetelephonehasnotbeenlogged
in, »©-----/ /---‰ « will be shown in the display instead of the time.
Configuring the IP-S400 without DHCP
SimplelogginginunderDHCPisexplainedonPage.IfyouhavedifferentsettingsinyourPABXsystemyou
canenterthatdatahere.YoucancallupthedataandIPaddresshereforasystemtelephoneloggedinunder
DHCP, or, you can change these settings if DHCP is de-activated.
Begin as follows:
a
Mss
Configuration TCP/IP settings
Configuration
84
To Next Page
Loading...
Need help?
General
