s Press the appropriate softkey. Main TCP/IP and
Network settings
Sys-Server
DHCP Server
Gateway
Own IP-address
Netmask
s Sys Server:
If the elmeg PABX system gateway serves si
-
multaneously as the system server you do not
need to input any data here. If this is not the
case you must click the Softkey »No« and
then enter the system server IP address here.
Gateway IP address when connecting directly
to the elmeg PABX system.
Act gateway as Sys
server too (IP) ?
No
ok
s DHCP Server:
Here, you can select whether your system te-
lephone is to be assigned its IP address auto-
matically from the system (»On«), or whether
you wish to configure this feature on your
own (»Off«).
Use automatic IP
address setting ?
Off
On
s Gateway:
If »DHCP« is not activated you must enter the
network IP address here in which your sys-
tem telephone is located.
IP address of
gateway
INA>192.168.1.250!
s IP address:
If you have selected »Off« under »DHCP«,
you must enter the IP address for the telepho
-
ne as given by the PABX system or by the net
-
work in which the system telephone is
located.
Own IP address (IPS-
Phone)
INA>192.168.1.51
s Netmask:
In the setting »DHCP« the network / subnet
-
work mask is applied to the PABX system. If
»DHCP« is de-activated, you can enter the
appropriate data here on your own.
Subnet mask
INA>255.255.255.0
Configuration
85
To Next Page
Loading...
Need help?
General
