Funkwerk elmeg CS400xt User Manual

Begin as follows:
a
Mssss
Configura
-
tion
MSN MSN-1
...
MSD10
MSN ext.
t
O
Enter the MSN. In this example: »12«.
ThisMSN must already be assignedasan »in
-
ternalnumber«for yoursystemtelephone via
the »Professional Configurator«, or assigned
now.ThisMSNisinactiveuntilthesameMSN
(internal number) is entered using the
»Professional Configurator«.
Program MSN-1
> 12
Log-on
Thefollowinginputactionsareoptionalandareusedonlyforsystemsecurity–theyarenotne
-
cessarily required for proper functioning of the system.
Simplelog-in for DHCPis described onPage. If aPINhas already beengivenunder »Allowconfiguration«
and the »Log-in name« entered under »Subscriber name« in the »Professional Configurator«, you must
now also enter this informationfor theIP-S400. Youmust enter the MSN asthe name(only digits are per-
mitted). You can do this using the »Professional Systel-Configurator« or on the system telephone itself. If
you enter the »IPS Log-in PIN« in the system telephone first, you must also enter that information in the
subsequent configuration for the PABX system.
Entering the IPS Log-in PIN
Begin as follows:
a
Ms ss>s
Configuration MSN MSN-1...MSN10 IPS Log-In PIN
t
O
EnterthephonePINunder»PIN«. Onlydigits
are permitted for this PIN. In the example
shown here (factory setting) »0000«.
Confirm your entry by pressing OK.
Input PIN please
> 0000
Entering the »Sys-Server Log-In PIN for the IPS«
Observe the different designations when entering the PIN:
PIN name in the configuration with the
system telephone:
Log-In PIN.
PIN name in the configuration using the
»Professional Systel-Configurator« for the system telephone:
Log-in-PIN
PIN name for configuration of the subscriber
the »Professional Configurator« for the PABX system:
PIN
Configuration
83

Funkwerk elmeg CS400xt Specifications

General

Brand	Funkwerk
Model	elmeg CS400xt
Category	Telephone
Language	English