Setting the volume
Begin as follows:
a
M s <> s
Acoustic Audio-In
< Use the arrow buttons to select the desired
volume.
Audio-In Idle-
Volume
- ©©©−− +
Settings
Direct call
You can program a direct call for your telephone so that when you press any key (except for ESC and the
menukey)asetnumberwillbedialed.Iftheautomaticcallfunctionisactiveonlyoneconnectioncanbees
-
tablishedtothesetnumber. Ifyouwishtoestablishaconnectiontoadifferentnumberyoumustfirstdeac-
tivate the direct dial-in function.
An active direct call is protected by means of the telephone PIN (see page 74). The direct call function can
thenonly bedeactivated after entering this PIN. As long as the PIN is setto »0000« (default setting), you
do not need to enter the PIN and can continue by pressing OK.
The following functions are possible with the automatic dial-in activated:
•
Automaticdialingofthesetnumberafterliftingthehandsetofyourphone,orpressinganykey(ex-
ceptforESCandtheF-menukey).
•
Acceptingcalls,provided theseare notsuppressedbythecallfilter.
•
Signalingofpreviouslyprogrammedappointmentreminders.
Further functions (e.g.: function keys, TAPI functions or headset operation) are not possible
when direct dialing is activated.
Programming an automatic call number
Begin as follows:
a
Ms s s
Setting Direct cal MSN ext.
t
O
Enter the telephone number.
In this example: »098765«.
Confirm your entry with OK.
Dir. call-in number
Direct cal>098765
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Settings
65
To Next Page
Loading...
Need help?
General
