The System Management->Remote Authentication->TACACS+ ->Newmenu consists of
the following fields:
Fields in the Basic Parameters menu
Field Description
Authentication Type Displays which TACACS+ function is to be used. The value
cannot be changed.
Possible values:
• 2$ 0%: Here, you can define whether the
current TACACS+ server is to be used for login authentication
to your device.
Server IP Address Enter the IP address of the TACACS+ server that is to be re-
quested for login authentication.
TACACS+ Secret Enter the password to be used to authenticate and, if applic-
able, encrypt data exchange between the TACACS+ server and
the network access server (your device). The maximum length
of the entry is 32 characters.
Priority Assign a priority to the current TACACS+ server. The server
with the lowest value is the one used first for TACACS+ login
authentication. If there is no response or access is denied (only
if Policy = *!), the entry with the next-
highest priority is used.
The available values are to , the default value is .
Entry active Select whether this server is to be used for login authentication.
The function is activated by selecting #/.
The function is enabled by default.
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field Description
Policy Select the interpretation of the TACACS+ response.
Possible values:
• *! (default value): The TACACS+ serv-
10 System Management Funkwerk Enterprise Communications GmbH
106 bintec Rxxx2/RTxxx2
To Next Page