Field Description
ers are queried in order of their priority (see Priority) until a
positive response is received or a negative response is re-
ceived from an authoritative server.
• 0: A negative response to a request is accep-
ted, i.e. a request is not sent to another TACACS+ server.
The device's internal user administration is not turned off by
TACACS+. It is checked after all TACACS+ servers have been
queried.
TCP Port Shows the default TCP port ( ) used for the TACACS+ pro-
tocol. The value cannot be changed.
Timeout Enter time in seconds for which the NAS is to wait for a re-
sponse from TACACS+.
If a response is not received during the wait time, the next con-
figured TACACS+ server is queried (only if Policy = *!
) and the current server is set to status
>/%.
The possible values are to , the default value is '.
Block Time Enter the time in seconds for which the current server is to re-
main in blocked status.
At the end of the block time, the server is set to the status spe-
cified in the Entry active field.
The possible values are to ', the default value is . The
value means that the server is never set to >/% status
and thus no other servers are queried.
Encryption Select whether data exchange between the TACACS+ server
and the NAS is to be encrypted with MD5.
The function is activated by selecting #/.
The function is enabled by default.
If the function is not enabled, the packets and all related inform-
ation are transferred unencrypted. Unencrypted transfer is not
recommended as a default setting and should only be used for
debugging.
Funkwerk Enterprise Communications GmbH
10 System Management
bintec Rxxx2/RTxxx2 107
To Next Page
Loading...