Field Description
• 40
• 40 1/
• % -% (default value)
40 and 40 1/ are only for the use of X.31 TEI for
CAPI applications. For 40, the TEI value set in the CAPI ap-
plication is used. For 40 1/, the value of the CAPI ap-
plication is ignored and the default value set here is always
used.
% -% is set if you want to use X.31 TEI for the X.25
device.
ISDN-PRI interface
For a Primary Rate Interface (PRI, or S2M), the channels are transmitted in series in so-
called time slots.
Choose the button to edit the configuration of the ISDN port.
Funkwerk Enterprise Communications GmbH
11 Physical Interfaces
bintec Rxxx2/RTxxx2 131
To Next Page
Loading...