Fields in the Performance Settings menu
Field Description
Wireless Mode
Select the wireless technology that the access point is to use.
Für Operation Band = @G 7?
Possible values:
• $: The device operates only in accordance with
802.11g. 802.11b clients have no access.
• #: Your device operates only in accordance with
802.11b and forces all clients to adapt to it.
• = #7$": Your device adapts to the client
technology and operates according to either 802.11b or
802.11g.
• = /$ #7$": Your device adapts to the cli-
ent technology and operates according to either 802.11b or
802.11g. Only a data rate of 1 and 2 mbps needs to be sup-
ported by all clients (basic rates). This mode is also needed
for Centrino clients if connection problems occur.
• = & #7$": Your device adapts to the
client technology and operates according to either 802.11b or
802.11g. The following applies for mixed-short: The data rates
5.5 and 11 mbps must be supported by all clients (basic
rates).
• #7$7: Your device operates according to either
802.11b, 802.11g or 802.11n.
• $7: Your device operates according to either
802.11g or 802.11n.
• : Your device operates only according to 802.11n.
For Operation Band = @G , @G ? ,
@G 7? or @G ?
Possible values:
• : The device operates only in accordance with
802.11a.
• : Your device operates only according to 802.11n.
• 7: Your device operates according to either
802.11a or 802.11n.
Funkwerk Enterprise Communications GmbH
13 Wireless LAN Controller
bintec Rxxx2/RTxxx2 171
To Next Page
Loading...