Field Description
Max. Transmission
Rate
Select the transmission speed.
Possible values:
• 0 (default value): The transmission speed is determined
automatically.
• A8/B: According to setting for Operation Band, Band-
width, Number of Spatial Streams and Wireless Mode vari-
ous fixed values in mbps are available.
Burst Mode
Activate this function to increase the transmission speed for
802.11g through frame bursting. As a result, several packets
are sent one after the other without a waiting period. This is par-
ticularly effective in 11b/g mixed operation.
The function is enabled with #/.
The function is disabled by default.
If problems occur with older WLAN hardware, this function
should not be active.
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field Description
Channel Plan
Select the desired channel plan.
The channel plan makes a preselection when a channel is se-
lected. This ensures that no channels overlap, i.e. a distance of
four channels is maintained between the channels used. This is
useful if more access points are used with overlapping radio
cells.
Possible values:
• 0//: All channels can be dialled when a channel is selected.
• 0: Depending on the region, operation band, wireless
mode and bandwidth, the channels that have a distance of 4
channels are provided.
• 3& : You can select the desired channels your-
self.
13 Wireless LAN Controller Funkwerk Enterprise Communications GmbH
172 bintec Rxxx2/RTxxx2
To Next Page
Loading...