In the Wireless LAN Controller->Maintenance->Firmware Maintenance menu, a list of
all Managed Access Points is displayed.
For every access point, you see an entry with a parameter set (Update firmware, Loca-
tion, Device, IP Address, MAC Address, Firmware Version, Status).
Possible values for Status
Status Meaning
Image already exists. The software image already exists; no update is required.
Error An error has occurred.
Running The operation is currently in progress.
Done The update is complete.
The Wireless LAN Controller->Maintenance->Firmware Maintenance menu consists of
the following fields:
Fields in the Firmware Maintenance menu
Field Description
Action
Select the action you wish to execute.
After each task, a window is displayed showing the other steps
that are required.
Possible values:
• 3, &)& &: You can also start an update
of the system software.
• - %$ & : You
can save a configuration which contains the AP status inform-
ation.
Source Location
Select the source for the action.
Possible values:
• @++ & (default value): The file is stored respectively
on a remote server specified in the URL.
• 4 & 5 &: The file is
on the official Funkwerk update server. (Only for Action= 3,!
&)& &)
• +5+ &: The file is stored respectively on a TFTP
server specified in the URL.
13 Wireless LAN Controller Funkwerk Enterprise Communications GmbH
182 bintec Rxxx2/RTxxx2
To Next Page
Loading...