Field Description
• 1-E '1-E >/&E 4& ! %, #/%
&G I ": Uses a special profile that contains the propos-
als DES, 3DES and Blowfish.
• 0- E 0-E 0-E +& ! %,
#/% &G I >"
Real Time Jitter Con-
trol
Only for Traffic shaping enabled
Real Time Jitter Control optimises latency when forwarding real
time datagrams. The function ensures that large data packets
are fragmented according to the available upload bandwidth.
Real Time Jitter Control is useful for small upload bandwidths (<
800 kbps).
Activate or deactivate Real Time Jitter Control.
The function is enabled with #/.
The function is disabled by default.
Control Mode Only for Real Time Jitter Control enabled.
Select the mode for optimising voice transmission.
Possible values:
• 0// ;+ -&: All RTP streams are optimised. The
function activates the RTP stream detection mechanism for
the automatic detection of RTP streams. In this mode, the
Real Time Jitter Control is activated as soon as an RTP
stream has been detected.
• %: Voice data transmission is not optimised.
• 4// ;+ -& /): This mode is used if
either the VoIP Application Layer Gateway (ALG) or the VoIP
Media Gateway (MGW) is active. Real Time Jitter Control is
activated by the control instances ALG or MGW.
• 0/)&: Real Time Jitter Control is always active, even if no
real time data is routed.
Queues/Policies Configure the desired QoS queues.
For each class created from the class plan, which is associated
14 Networking Funkwerk Enterprise Communications GmbH
214 bintec Rxxx2/RTxxx2
To Next Page
Loading...