Field Description
The function is enabled with #/.
The function is disabled by default.
Burst size Only for Traffic Shaping enabled.
Enter the maximum number of bytes that may still be transmit-
ted temporarily when the data rate permitted for this queue has
been reached.
Possible values are to .
The default value is .
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field Description
Dropping Algorithm Choose the procedure for rejecting packets in the QoS queue, if
the maximum size of the queue is exceeded.
Possible values:
• +/ 1, (default value): The newest packet received is
dropped.
• @ 1,: The oldest packet in the queue is dropped.
• ; 1,: A randomly selected packet is dropped from
the queue.
Congestion Avoidance
(RED)
Select the process according to which packets are preventively
dropped between Min. queue size and Max. queue size to pre-
vent queue overflow (RED=Random Early Detection).
Possible values:
• * (default value): No packets are dropped.
• $!: Packets are dropped according to the
level of the queue. This procedure ensures a smaller long-
term queue size for TCP-based data traffic, so that traffic
bursts can also usually be transmitted without large packet
losses.
Min. queue size Enter the lower threshold value for the process prevention of
Funkwerk Enterprise Communications GmbH
14 Networking
bintec Rxxx2/RTxxx2 217
To Next Page
Loading...