Field Description
Possible values are to .
The default value is .
Fields in the CC Activation menu
Field Description
Continuity Check (CC)
End-to-End
Select whether you activate the OAM-CC test for the connection
between the endpoints of the VCC or VPC.
Possible values:
• && (default value): OAM CC requests are responded to
after CC negotiation (CC activation negotiation).
• 0%: OAM CC requests are sent after CC negotiation (CC
activation negotiation).
• >: OAM CC requests are sent and answered after CC ne-
gotiation (CC activation negotiation).
• * $: Depending on the setting in the Direction
field, OAM CC requests are either sent and/or responded to.
There is no CC negotiation.
• &&: The function is disabled.
Also select whether the test cells of the OAM CC are to be sent
or received.
Possible values:
• > (default value): CC data is both received and generated.
• -: CC data is received.
• -%: CC data is generated.
Continuity Check (CC)
Segment
Select whether you want to activate the OAM-CC test for the
segment connection (segment = connection of the local end-
point to the next connection point) of the VCC or VPC.
Possible values:
• && (default value): OAM CC requests are responded to
after CC negotiation (CC activation negotiation).
• 0%: OAM CC requests are sent after CC negotiation (CC
activation negotiation).
17 WAN Funkwerk Enterprise Communications GmbH
304 bintec Rxxx2/RTxxx2
To Next Page