Field Description
• ,
• /
• &,
• &
• ,
• ,
•
• *$
Additional services are created in Firewall->Services->Service
List.
In addition, the service groups configured in
Firewall->Services->Groups can be selected.
Action Select the action to be applied to a filtered packet.
Possible values:
• 0%%&& (default value): The packets are forwarded on the
basis of the entries.
• 1) : The packets are rejected.
• ;M% : The packets are rejected. An error message is is-
sued to the sender of the packet.
Apply QoS Only for Action = 0%%&&
Select whether you want to enable QoS for this policy with the
priority selected in Priority.
The function is enabled with #/.
The option is deactivated by default.
If QoS is not activated for this policy, bear in mind that the data
cannot be prioritised on the sender side either.
A policy for which QoS has been enabled is also set for the fire-
wall. Make sure therefore that data traffic that has not been ex-
pressly authorised if blocked by the firewall!
Priority Only for Apply QoS = #/
19 Firewall Funkwerk Enterprise Communications GmbH
370 bintec Rxxx2/RTxxx2
To Next Page
Loading...