Funkwerk R1202 - Page 459

Field Description
Monitored Interface
Only for Event Type % -& and %
+%
Select the interface whose defined status shall trigger an opera-
tion.
Interface Status
Only for Event Type % -&
Select the status that the interface must have in order to initiate
the intended operation.
Possible values:
• 3, (default value): The function is enabled.
• 1: The interface is disabled.
Traffic Direction
Only for Event Type % +%
Select the direction of the data traffic whose values should be
monitored as initiating an operation.
Possible values:
• ;C (default value): Incoming data traffic is monitored.
• +C: Outgoing data traffic is monitored.
Interface Traffic Condi-
tion
Only for Event Type % +%
Select whether the value for data traffic must be 
(default value) or 2&& the value specified in +&
+% in order to initiate the operation.
Transferred Traffic
Only for Event Type % +%
Enter the desired value in kBytes for the data traffic to serve as
comparison.
The default value is .
Destination IP Address
Only for Event Type $ +&
Enter the IP address whose accessibility is to be checked.
Source IP Address
Only for Event Type $ +&
Funkwerk Enterprise Communications GmbH
21 Local Services
bintec Rxxx2/RTxxx2 445