Fig. 20: Funkwerk Configuration Interface Initial Screen
8.3.1.1 Calling the Funkwerk Configuration Interface
(1) Check whether the device is connected and switched on and that all the necessary
cables are correctly connected (see Setting up and connecting on page 6).
(2) Check the settings of the PC from which you want to configure your device (see Con-
figuring a PC on page 13).
(3) Open a web browser.
(4) Enter ,677 in the address field of the web browser.
(5) Enter in the User field and in the Password field and click LOGIN.
You are not in the status menu of your device's Funkwerk Configuration Interface (see
Status on page 77).
8.3.1.2 Operating elements
Funkwerk Configuration Interface window
8 Access and configuration Funkwerk Enterprise Communications GmbH
58 bintec Rxxx2/RTxxx2
To Next Page
Loading...