Menu Function
gically without abandoning the entire network.
Routing Protocols
Menu Function
RIP In this menu, you configure the dynamic updating of the routing
table via RIP.
OSPF In this menu all global and interface-specific OSPF settings are
performed.
Multicast
Menu Function
General In this menu, you enable or disable multicast routing.
IGMP In this menu, you configure the interfaces on which IGMP is to
be enabled.
Forwarding
In this menu, you specify which multicast groups are always
passed between the interfaces of your device.
OSPF In this menu, you can switch PIM functions on and off.
WAN
Menu Function
Internet + Dialup In this menu, you define the Internet connections for the various
connection protocols or dialup connections.
Leased Line In this menu, the permanent connections of two communication
partners are displayed.
Real Time Jitter Con-
trol
In this menu, you can set the upstream speed.
VPN
Menu Function
IPSec In this menu, you configure VPN connections over IPSec.
L2TP In this menu you configure the use of L2TP (Layer 2 Tunnelling
Protocol).
PPTP In this menu, you configure the an encrypted PPTP tunnel.
8 Access and configuration Funkwerk Enterprise Communications GmbH
70 bintec Rxxx2/RTxxx2
To Next Page
Loading...