high
neutral
With "SPEED": Quick start without skidding
Without "SPEED": Slow start due to skidding
62
Function
Servo Speed "SPEED"
(Preparation)
- On the SPEED screen make the following adjustments:
1
(Delay adjustment)
On the SPEED screen, select the setting item
THR "TURN" by moving the (JOG) button up or
down. Use the (+) or (-) buttons to adjust the de-
lay amount.
Throttle Speed adjustment
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
The throttle speed adjustment
can be controlled with digital dial or digital trim. With
the function select
trim dial
function (See page 70).
Dial / Trim Setting
-Throttle servo (ESC) operation is delayed so that the
drive wheels will not spin even if the throttle trigger is
operated more than necessary.
This delay function is not performed when the throttle
trigger is returned and at brake operation.
Operation
THR (
Throttle
Speed)
Sudden throttle trigger operation on a slippery
road causes the wheels to spin and the vehicle
cannot accelerate smoothly. Setting the throttle
speed function reduces wasteful battery consump-
tion while at the same time permitting smooth,
enjoyable operation.
Adjustment range
1~100%
At 100%, there is no delay.
2
When finished with setting, return to the MENU screen by
pressing the (END) button.
4PV-Eng-08-1-Function-P45-69.indd 62 2016/08/05 9:35:35
To Next Page
Loading...
