ENGLISH Use e Maintenance
3.3 HANDLING
ATTENTION!
The Customer must apply the rules envisaged in the
European Directives EEC 391/89 and 269/90 and sub-
sequent modifications on the possible risks for load-
ing and unloading operators caused by manual han-
dling of loads.
During handling operations wear suitable personal
protection equipment:
Overalls Gloves Shoes Hardhat
If the machine has to be handled, it should be lifted
by hooking cloth ropes to the attachment points provided
and using a suitable hoist or crane with sufficient capacity
(Fig. 3.4). Because of the danger involved, this operation
should be carried out by trained and responsible person-
nel. The mass of the machine is on the identification Plate
(Fig.1.2). Stretch the rope to keep the machine level. The
hook points can be detected by finding the “hook” symbol.
Hook up at point: A.
ATTENTION!
• Packaging materials (pallets, cartons, etc.) must
be disposed of as prescribed by the existing reg-
ulations through authorised disposal companies.
• Parts making up the machine must not be lifted by
hooking them up from moving or weak parts such
as guards, electrical runways, pneumatic parts,
etc.
• Standing under suspended loads is not allowed;
unauthorised personnel are not allowed access
to the work sites; it is mandatory to wear overalls,
safety footwear, gloves and a hardhat.
Figure 3.4: Lifting couplings
20- EN Cod. F07011577
To Next Page
Loading...
