Use e Maintenance ENGLISH
Figure 1.1: PPE Personal Protective Equipment use
• Routine operation
The machine intended (or usual) use according to its
design, construction and function.
• Adjustments
Adjustment, setup and calibration of all those devices
that need to be adapted to normal machine operation.
• Cleaning
Removal of dust, oil and work process residues which
may jeopardise correct machine operation and use as
well as the health/safety of operators.
• Maintenance
Periodic checking of machine parts which are subject
to wear or require replacement.
• Disassembly
Complete or partial disassembly of the machine for
any reason whatsoever.
• Demolition
Permanent removal of all the machine parts for final
machine dismantling in order to enable recycling or
differentiated collection of components according to
the methods envisaged by the existing regulations.
ATTENTION!
Do not wear protective gloves which may get
entangled in the machine moving parts.
1.2 GUARANTEE
The guarantee is valid for a year, against all defects
of material, from the date of delivery of the equipment.
On delivery, check that the equipment has not been
damaged during transport and that the accessories are
integral and complete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRIT-
ING WITHIN EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guaran-
tee only when he has respected the conditions concerning
the benefit of the guarantee, set out in the supply contract.
1.2.1 Expiry of guarantee
Besides what has already been set out in the supply con-
tract, the guarantee expires:
• If the limits set out in the technical data table are over-
shot.
• If the instructions set out in this booklet have not been
carefully followed.
• If the equipment is used badly, defective maintenance
or other errors by the client.
• If modifications have been carried out without written
authorization of the manufacturer and if non original
spare parts have been used.
Cod. F07011577 EN - 9
To Next Page
Loading...
