Chapter 6
DEMOLITION AND DISPOSAL
This operation is to be carried out by the customer.
Before demolishing the machine, you are advised
to carefully check its physical condition and ascertain
whether there are any parts of the structure that may be
susceptible to structural collapse or breakage during de-
molition.
The customer should operate in compliance with the en-
vironment protection laws in force in his/her country.
WARNING!
The machine demolition operations should be
carried out by skilled personnel only, equipped
with suitable protective clothing (safety footwear
and gloves) and auxiliary tools and equipment.
All the disassembly operations for demolition
should be carried out with the machine stopped
and detached from the tractor.
Before demolishing the machine, you are advised to
render harmless all the parts that may be a source of dan-
ger and therefore:
• scrap the structure using specialized firms,
• remove any electrical apparatus according to the
laws in force,
• collect oils and greases separately, to be disposed
of through specialized firms, in accordance with the
regulations of the country in which the machine was
used.
When the machine is demolished the CE mark should
be destroyed together with this manual.
Finally, we remind you that the manufacturer is al-
ways available for any and all necessary assistance
and spares.
46
To Next Page
Loading...
