AquaTrans™ AT600 User’s Manual 149
Chapter 6. Communication
Command 208 (0xD0): Read Calibration Configuration
This command is to read Calibration Configuration.
Table 137: Request Data Bytes for Read Calibration Configuration
Byte Format Description
None
Table 138: Response Data Bytes for Read Calibration Configuration
Byte Format Description
0 Unsigned-8 Reynolds correction
1 Unsigned-8 Active MultiK Enable
2 Unsigned-8 KFactor Type:
0: Velocity, 1: Reynolds
3 – 6 Float Static KFactor
7 Unsigned-8 KFactor Points
8 - 11 Float Kinematic Viscosity
Table 139: Command-Specific Response Codes for Read Calibration Configuration
Code Class Description
0 Success No Command-Specific Errors
1-5 Undefined
6 Error Device-Specific Command Error
7-127 Undefined
To Next Page
Loading...
