AquaTrans™ AT600 User’s Manual 71
Chapter 4. Initial Setup and Programming
4.7.4.2 Selecting the Pipe Material
In the Pipe menu, select Pipe Material and press [√]. The following screen
opens.
Note: Table 3 below lists the available pre-programmed pipe materials.
Table 3: Pre-programmed Pipe Materials
Name Pipe Material
CARBON STEEL Carbon Steel
SS STEEL Stainless Steel
DUCT IRON Duct Iron
CAST IRON Cast Iron
Cu Cuprum
Al Aluminum
BRASS Brass
30%Ni 30% Nickel Copper Alloy
10%Ni 10% Nickel Copper Alloy
PYREX GLASS Pyrex Glass
FLINT GLASS Flint Glass
CROWN GLASS Crown Glass
NYLON PLSTC Nylon Plastic
POLYE PLSTC Polyethylene
POLYP PLSTC Polypropylene
PVC PLSTC Polyvinyl chloride
ACRYL PLSTC Acrylic Plastic
Select the appropriate pipe material from the list, and press [
] to return
to the previous screen. If your pipe material is not listed, select
Other and
press [√] twice. A screen similar to the following opens.
Pipe
Pipe OD
Pipe ID
Wall Thickness
Pipe Material
To Next Page
Loading...
