GE Giraffe OmniBed Carestation CS1 - 7.19 Display Module Repairs

Chapter 7: Repair Procedures
Display Module Repairs
Service Manual 7-65
7.19 Display Module Repairs
7.19.1 Rear Cover
1. Using a 3 mm hex key, remove the 4 (M4 X 10) button head socket screws, M4 flat washer, and M4 split
washers that secure the back cover to the display module and remove the cover.
7.19.1.1 Carrier Plate Hardware
Location Qty Part Number Description Purpose
A 6 2066776-001 PLASTIC THREAD FORMING
SCREW 40 x 12
FRONT BEZEL MTG
B 4 2066775-001 PLASTIC THREAD FORMING
SCREW 30 x 10
LCD STAND OFF MTG
C 14 2066774-001 THREAD FORMING SCREW
M3 x 8
SBC and ISOLATION SHIELD
MTG
D 2 6600-0713-431 STAR WAHSER M3 ISOLATION SHIELD MTG
FIGURE 7-58. Rear Cover