GE Vivid i - The Assign and Measure Modality; Starting the Assign and Measure Modality

Measurement and Analysis
Vivid i User’s Manual 111
2378958-100 Rev. 02
The Assign and Measure modality
In this measurement modality, the user selects a study
consisting in a set of related pre-labelled measurements.
Starting the Assign and Measure
modality
1. Press MEASURE on the control panel.
The Measurement Menu is displayed in the Parameters
window (see example Figure 6-2).
The trackball cursor is in the scanning window, ready for
starting measurement.
Figure 6-1: Example of a measurement study
1. Active application
2. Study
3. Selected study
4. Opened study
5. Measurements related to the
area study for the cardiac
application
To Purchase, Visit Avobus.com or call 1-800-674-3655