GE Vivid i

Presets and System setup
Vivid i User’s Manual 303
2378958-100 Rev. 02
The Modify Calculations sheet
The Modify Calculations sheet is used to configure the
calculations to be performed when doing a Doppler vascular
measurements.
Figure 12-8: The Modify Calculations sheet
Parameter configuration:
The following example describes how to configure the Carotid
Doppler calculations:
1. In the Modify Calculations sheet, select Vascular next to
M&A Categories.
The Vascular measurement category is displayed.
2. Select Carotid.
The available calculations are displayed.
3. Check the desired calculations to be performed.
4. Select Save.
To Purchase, Visit Avobus.com or call 1-800-674-3655