GE Vivid i

Presets and System setup
Vivid i User’s Manual 287
2378958-100 Rev. 02
Starting the Configuration package
To access the Configuration package the user has to log on as
a specific user (see page 331). This ensures user-specific and
user-defined settings and presets to be used.
The access to the entire configuration package is user
configuration dependent (see page 331).
To open the Configuration package
1. Press CONFIG on the alphanumeric keyboard.
The Log In window is displayed asking for operator ID and
password (see Figure 12-1).
2. Select Log on when completed.
The Setup dialogue window is displayed (see Figure 12-2).
Figure 12-1: The Operator login window
1. Select the operator
2. Type password