GE Vivid i

Getting started
42 Vivid i User’s Manual
2378958-100 Rev. 02
Starting an examination
Beginning an exam consists of three steps:
• Creating a new patient record or starting a new examination
from an existing patient record (see below)
• Selecting Probe and Application (see page 46)
• Start scanning (see page 46)
Creating a new Patient record or
starting an examination from an
existing patient record
Starting an examination
1. Press PATIENT.
The Patient Handling screen is displayed.
Figure 1-12: The Patient Handling Screen
2. Press CREATE NEW PATIENT.
To create an opera-
tor ID, see
page 331.
If the unit is password protected a Log In window will
appear asking for operator ID and password (as explained
in Figure 1-13).
To Purchase, Visit Avobus.com or call 1-800-674-3655