GE Vivid i User Manual

Archiving
Vivid i User’s Manual 189
2378958-100 Rev. 02
Stand-alone scanner scenario
In this scenario images will most likely be reviewed from
images stored in the internal archive. If digital images are
stored, they should be stored on the scanner’s internal
harddrive.
Figure 8-28: Stand-alone scanner with LocalArchive-Int.HD dataflow
Data management
Data acquisition
1. Select the LocalArchive-Int.HD dataflow as default
dataflow.
In this configuration the local database is used for patient
archiving. Images are stored to internal harddrive.
Image review
The same dataflow is used for review on the system.
To Purchase, Visit Avobus.com or call 1-800-674-3655

GE Vivid i Specifications

General

Type	Portable Ultrasound System
Transducer Ports	2 active ports
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Imaging Modes	2D, M-Mode
Connectivity	DICOM, Ethernet, USB
Applications	Vascular, Abdominal
Weight	Approximately 5.5 kg (12.1 lbs)
Battery Life	Up to 1 hour (depending on usage)
Probes	Phased array, Linear array, Convex array