GE Vivid i

Report
242 Vivid i User’s Manual
2378958-100 Rev. 02
Direct report
Direct report enables the user to insert comments at any time
during the examination that will be part of the final report.
Direct report provides also an overview over the measurements
completed.
Creating comments
1. Press UPDATE MENU.
2. Select Direct report (see Figure 9-2).
3. In the Direct report screen, select the comment type.
4. Type your comments in the Text field.
5. To add a measurement in the comment, double-click a
measurement in the Measurement overview field.
Figure 9-2: The Direct report
1. Open Direct report
2. Select the type of information
3. Create/insert pre-defined text
4. Text field
5. List of measurements completed
6. Exits the Direct report