GE Vivid i

Archiving
176 Vivid i User’s Manual
2378958-100 Rev. 02
Deleting archived information
Only user logged in
with full operator
rights can delete pa-
tient records (see
page 331 for further
information).
To delete a patient record
1. Press PATIENT on the Front panel.
2. Select Patient List.
The Search/Create Patient window is displayed
(Figure 8-12, page 169).
3. Type the patient Last Name, and/or ID.
4. Trackball to the actual patient record.
5. Press
SET to highlight the patient record to delete.
6. Press Delete in the Search/Create Patient window.
A dialogue box is displayed asking for confirmation of the
deletion (Figure 8-17).
7. Trackball to OK and press
SET on the control panel.
Figure 8-17: Delete patient record confirmation prompt
To delete an examination
1. Press PATIENT on the Front panel.
2. Select Patient List.
The Search/Create Patient window is displayed
(Figure 8-12, page 169).
3. Type the patient Last Name, and/or ID depending on
system configuration.
4. Trackball to the actual patient record and double-click the
Trackball
SET key (or press SET once and SELECT PATIENT)
to select the patient.
The Examination list window is displayed.
5. Trackball to the examination to delete.