GE Vivid i

Basic scanning operations
Vivid i User’s Manual 65
2378958-100 Rev. 02
Figure 2-8: The Patient ECG Connector Port
Physio controls
Physio assignable controls
Common controls
Horizontal sweep
Adjust the refresh rate of the physiological trace. This control is
active only in 2D and color modes. The sweep speed of the
physio traces in M-Mode and Doppler is identical to the
M-Mode or Doppler horizontal sweep adjusted by the user.
Gain
Enables the user to change the amplitude of the physiological
trace displayed on the screen.
Position
Enables the user to move the physiological trace on the screen.
ECG
Turns the ECG trace on and off.