Getting started
22 Vivid i User’s Manual
2378958-100 Rev. 02
Moving and transporting the unit
Moving the unit on a Cart
To prepare the unit to be moved
1. Turn the system OFF either in Standby or Full Shutdown
mode, and remove the AC power plug from the wall outlet.
2. Fold the LCD screen to the fully closed position.
Note the marks on
each cable to recon-
nect them later.
3. Disconnect all cables linking the system or peripherals to
any off-board peripheral devices and network.
4. Secure the unit’s power cable on the Cart.
5. Place all probes securely on the cart. Ensure that the probe
cables do not protrude from the unit or interfere with the
wheels.
6. Ensure that no loose items are left on the unit
To ensure safety while moving the unit
1. Ensure that the LCD screen is in the locked position.
2. Proceed cautiously when crossing door or elevator
thresholds. Do not attempt to move the unit using cables or
probe connectors. Take extra care while moving the unit on
inclines.
3. Ensure that the unit does not strike the walls or door
frames.
4. Ensure the pathway is clear.
5. Move the unit slowly and carefully.
CAUTION
Avoid ramps that are steeper than 10 degrees.
To Next Page
Loading...
