Getting started
Vivid i User’s Manual 21
2378958-100 Rev. 02
Turning on the system at the new location
1. In order to maintain the battery charge it is recommended
to plug the AC cable into a proper power outlet. If a charged
battery is in place, the power plug does not need to be
plugged into the wall outlet.
2. Press (on/off button) (Figure 1-6).
3. If the system does not turn ON, the battery may be drained.
In this case, plug the power plug into the wall outlet and try
again.
When turning on a system in standby it takes a few seconds
before it responds. Do not push the on/off button again during
this period (A second push will initiate a full shutdown).
The system can be used regardless of the battery level. The
battery is automatically charged when the system is plugged to
the wall outlet. It takes about 2 hours to charge a completely
discharged battery. This may gradually change as battery ages
with time.
To Purchase, Visit Avobus.com or call 1-800-674-3655
To Next Page
Loading...
