GE Vivid i

Measurement and Analysis
148 Vivid i User’s Manual
2378958-100 Rev. 02
Using Worksheet
1. Press WORKSHEET on the control panel and select the
measurement type (see Figure 6-17).
To scroll through pages
1. Select PAGE DOWN or PAGE UP.
To select the type of value
1. Trackball to the relevant cell in the Method column.
2. Press
SET.
A pop-up menu is displayed showing the different options
available (Figure 6-18).
Figure 6-18: The Calculation method options list.
3. Trackball to the required option.
4. Press
SET.
The value is updated accordingly.
Excluding or including measurements
One or more measurement values from a set of measurements
for a parameter can be excluded when doing average
calculation.
To exclude a measurement
1. Trackball to the measurement value to exclude.
2. Press
UPDATE MENU.
The Worksheet menu is displayed.
When excluded the
measurement dis-
play turns grey.
3. Trackball to Exclude Value.
4. Press
SET.
1. Average of the measurements taken
2. Maximum measurement
3. Minimum measurement.
4. Last measurement that was taken