GE Vivid i - Page 159

Measurement and Analysis
Vivid i User’s Manual 149
2378958-100 Rev. 02
To include a measurement
1. Trackball to the measurement value to include.
2. Press
UPDATE MENU.
The Worksheet menu is displayed.
3. Trackball to Include Value.
4. Press
SET.
Manually changing a value
Individual measured values can be manually changed using
the alphanumeric keyboard.
To manually change a value
1. Trackball to the value that is to be changed.
2. Press
SET.
An asterisk indi-
cates that the value
has been manually
altered. The calcula-
tion type is changed
to Edit.
3. Use the alphanumeric keyboard to enter the required value.
To restore automatic calculation
1. Trackball to the relevant cell in the Method column.
2. Press
SET.
A pop-up menu is displayed showing the different
calculation options available (Figure 6-18).
3. Press
SET.
The value is re-calculated according the method selected.
Deleting measurement parameter
1. Trackball to the measurement parameter to delete.
2. Press
UPDATE MENU.
The Worksheet menu is displayed.
3. Trackball to Delete Value.
4. Press
SET.