GE Vivid i

Archiving
196 Vivid i User’s Manual
2378958-100 Rev. 02
A scanner and EchoPAC PC in a
network environment
In this scenario the Vivid i is configured to work with an
ImageVault 3 or an EchoServer 7 patient demographics and
image server in a network environment. Images are first saved
on the local image buffer on the scanner and transferred to the
server when saving the examination.
The acquisition can be done online or offline. Both situations
are described below.
Network environment with online acquisition
Data management
Scanner’s dataflow configuration
1. Select the RemoteArch-RemoteHD dataflow as default
dataflow in the sublevel Dataflow in the subgroup
Connectivity of the Configuration management package
(see page 310 and following pages).
When saving the study on the scanner, the images are
transferred from the scanner’s image buffer to the server.
Patient demographics, measurements and reports are
transferred on the fly when entering the information on the
Vivid i.
Review on the EchoPAC PC workstation
1. Select the RemoteArch-RemoteHD dataflow on the
EchoPAC PC (can be configured as default dataflow).
2. Press Archive and select the patient to be reviewed.
CAUTION
Do NOT open a study on the EchoPAC PC workstation before the
study is closed on the scanner.