GE Vivid i User Manual

Archiving
158 Vivid i User’s Manual
2378958-100 Rev. 02
Storing cineloop without preview
The function Preview Loop before store is disabled (see
page 289).
1. While scanning, press
STORE.
The last valid cineloop is stored in the archive and a
thumbnail is displayed on the clipboard.
Scanning resumes immediately.
Storing cineloop with preview
The function Preview Loop before store is enabled (see
page 289).
1. While scanning, press
STORE.
The last valid cineloop is previewed on the screen (but not
stored).
2. If desired, press
CINELOOP and adjust the cineloop to be
stored using the assignables (see page 56).
3. Press
STORE to save the cineloop.
A thumbnail is displayed on the clipboard.
Saving stored images and cineloops to
a standard format
Stored images and cineloops can be saved to a removable
media in the following standard formats:
• Still images: JPEG, MPEG, DICOM and RawDICOM (Raw
data + DICOM)
• Cineloops: AVI, MPEG, DICOM and RawDICOM (Raw
data + DICOM)
Images can also be stored as MPEG format on a CD-R using
the Export function as described on page 160.
Procedure:
1. Trackball to the required image or loop icon on the
clipboard.
2. Press
SET.
The selected image is displayed.
3. Press
UPDATE/MENU on the control panel.
The System menu is displayed.

GE Vivid i Specifications

General

Type	Portable Ultrasound System
Transducer Ports	2 active ports
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Imaging Modes	2D, M-Mode
Connectivity	DICOM, Ethernet, USB
Applications	Vascular, Abdominal
Weight	Approximately 5.5 kg (12.1 lbs)
Battery Life	Up to 1 hour (depending on usage)
Probes	Phased array, Linear array, Convex array