GE Vivid i User Manual

Presets and System setup
Vivid i User’s Manual 305
2378958-100 Rev. 02
The diagnostic codes sheet
This sheet enables the creation (and deletion) of text inputs
that can be used when entering diagnostic codes in the
Examination list window (see Figure 8-14, page 172).
Figure 12-9: The Diagnostic codes sheet
Creating a diagnostic codes
1. Select New text to create a new diagnostic code (see
Figure 12-9).
2. In the Code field enter a name for the diagnostic code.
3. Trackball to the Text input display area.
4. Press
SET.
5. Enter the text.
1. List of text inputs
2. Text input name
3. Text input display area (free text area)
4. Create a text input

GE Vivid i Specifications

General

Type	Portable Ultrasound System
Transducer Ports	2 active ports
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Imaging Modes	2D, M-Mode
Connectivity	DICOM, Ethernet, USB
Applications	Vascular, Abdominal
Weight	Approximately 5.5 kg (12.1 lbs)
Battery Life	Up to 1 hour (depending on usage)
Probes	Phased array, Linear array, Convex array